The biggest worry for any boiler owner is the day it shuts down without a warning. At times you may never see the break down on your boiler coming especially when you are one to neglect maintenance and repair services. You must hire top notch Commercial boiler service to help you with new installation or replacement process of a boiler. Once you have a new boiler in place, there are certain maintenance terms you must adhere to as you will findout in the discussions below. 

Daily tips 

These are the things you or your maintenance manager ought to be doing daily for your boiler to be effective in its functioning. Check whether the temperature and pressure of boiler and the exhaust temperature are in the same range. Listen for any signs of unusual noises indicating broken moving parts. Check for soot below the boiler’s sight pot that releases the flame or any presence of soot in the flame. You also have to inspect the piping of the boiler and remove any forms of blockages that may exist and hinder movement. 

Weekly terms 

When it comes to the instructions to adhere to at least weakly thereare a few to check out.Start with doing evaporation tests to find out the water level in the boiler. Find out whether the alarm and signal lights work as expected and most importantly assess the fuel safety valves at themain burner. This will help you point out any leakage and operating issues that may exist. You should try testing the safety and operation controls to make sure that the pressure gauge is can be turned off and on with ease. 

Monthly tips 

You should at least consider removing any debris that is stuck in the filters of the access panel. The safety relief valve and relief valve must also be assessed to make sure there are no leakages in the system. You can also check the exterior of your boiler for any kind of hotspots that indicate excess heating. You should furthermore do the water treatment test that can help with reducing the impurities present in the water inside the boiler. You should lastly check the air pressure, high pressure, the fan; the boiler’s temperature interlocks before concluding your search. 

Quarterly and yearly 

You need to assess the boiler hydronic piping to ensure there are no leakages in the system. You should also proceed to align the base mounted pumps. Proceed to replace the plugs found in the control pipes or clean them if they are still in good condition. For the boiler to work all winter long, you need to consider adding some form of insulation to the boiler piping. You should also install electric wiring andswitches especially for the loose connections or areas that indicate overheating. Lastly observe the quality of the flame from the burner; it should be blue in color without suit to show complete combustion of the fuel. 

Leave comment

Your email address will not be published. Required fields are marked with *.